Páginas

lunes, 15 de noviembre de 2021

Which is the real piece of sushi, and which is Japan’s insane 429-piece plastic model sushi kit?

https://ift.tt/3nidclS Casey Baseel

Plastic sushi reaches a new level of craziness with the new ikura gunkan model.

Part of what makes sushi so delicious is its simplicity. After all, a standard piece of sushi really only has two parts, a block of rice and a slice of fish.

So when Japanese plastic model maker Syuto released tuna and salmon sushi models kits earlier in the year, we thought they couldn’t take more than a few minutes to put together, what with the slice of fish being just two simple plastic pieces. Then we found out that each grain of rice is a separate piece.

Now, Syuto is back with an even crazier kit. This one is a gunkan-style (seaweed wrapped) piece of sushi, and this time not only is each grain of rice its own individual piece, but so is each and every piece of ikura, or salmon roe!

Syuto actually did the research to figure out how many grains of rice and salmon eggs there are in an average piece of ikura sushi, and came up with 364 pieces of rice and 64 eggs. Add in the singular strip of nori (seaweed), and all together there are 429 pieces in this single-piece-of-sushi model.

▼ The kit even comes in a package styled after the takeout boxes used by traditional sushi restaurants in Japan.

Step 1 (actually Step 1 through 364) is to remove the grains of rice from their frame, so we got to work plucking them out.

Removing them by hand is no problem, but you might end up with some bits of hanging plastic as you pull them away from the frame. If that happens, a quick snip with a pair of needle-nose pliers should remove the unwanted excess.

As we got further into the process, we found it mysteriously relaxing. It only requires low-level motor skills, so it’s not difficult or frustrating, but having so many pieces of rice to prep kept our minds focused enough that they didn’t have time to stray to thoughts of stress, anxiety, or any other mental unpleasantries that can build up in your daily life. It was like the rest of the world faded away, leaving just us and the rice.

Once the rice was done, the next thing to work with was the nori, which is one long, pliable PVC strip. If we were making our plastic sushi exactly like how we’d make a real one, we’d form a complete block of rice first, then wrap the seaweed around it. However, to make sure we got a nice oval shape, we instead decided to curve the plastic seaweed into a loop first, then fill it with rice.

After using some adhesive to close the loop, we began pouring in the rice, bit by bit. Between pours we used a brush to apply a top layer of adhesive, since the plastic rice grains won’t stick together on their own like real rice does.

It’s important to add the rice gradually, since you’ll need to occasionally smooth out the new pieces to keep the visual effect looking fluffy, not craggy.

Before long, though, we got into a steady rhythm, and again there was something soothing about having a manageable cycle to focus on.

It took about 90 minutes to assemble the 364 pieces of rice and their seaweed wrap. Next it was on to the ikura itself!

Like the rice, the salmon eggs can be popped out of their frame by hand. However, we’d recommend using pliers to remove them instead. This will cut down on the amount of extra plastic hanging off at the separation point, and since the ikura is bigger and rounder than the rice, and also going to be the very top section of the model, you want them to look as nice as possible.

▼ The 64 pieces of ikura are made up of12 large, 24 medium, and 28 small eggs.

Once you’ve got the eggs popped and smoothed, adding them is pretty much the same process as with the rice: apply a top layer of adhesive to the sushi piece, then add the ikura on top, and repeat.

Because there are fewer eggs than grains of rice, and because even the small eggs are bigger than the grains, arranging them only took about 10 minutes, and then we were done!

The finished kit is amazingly realistic looking. How realistic?

No, we didn’t make two sushi models. The above photo is of the plastic ikura model next to a piece of actual, edible ikura sushi, as are these.

So which one is the plastic sushi, and which one is the real one? We’ve circled the model in the photos below.

With simple steps and no need to apply paint or decals, Syuto’s Sushi Puramo ver. Ikura, as the ikura sushi kit is officially called, is easy enough for even complete newbies to put together. At the same time, the repeating nature of the assembly process means that this isn’t a kit about challenging yourself, but more about keeping your hands and mind just occupied enough so that you can relax. If that sounds like the model-building session you’re in the mood for, the kit can be purchased here through Amazon for 1,540 yen (US$13.50). We highly recommend picking up some real sushi too, though, because you absolutely will get hungry while working on the kit.

Photos ©SoraNews24
● Want to hear about SoraNews24’s latest articles as soon as they’re published? Follow us on Facebook and Twitter!

No hay comentarios:

Publicar un comentario